SUP- K981 Superlift 2008 - 2010 Ford F250/F350 Diesel 4" Lift w/Arms Shocks
4" Lift Kit with replacement radius arms for 2008-2010 Ford F-250/350
4WD Pickups features set of massive, high clearance, precision
engineered, tubular radius arms designed to bolt right into the factory
mounts giving your ride a truly custom look and an easy install. These
heavy duty radius arms utilize a press fit Cleveite rubber bushing for
superior vibration damping and durability. The 4" lift also contains
new, engine specific rated, coil springs that works in conjunction with
our track bar relocation bracket to ensure proper steering geometry and
track bar phasing.
all Superlift lift kits, the 4” Replacement Radius Arm Lift Kit for
2008 -2010 Ford F250/350 4WD is backed by our Limited Lifetime Warranty
Satisfaction Guarantee.Superlift’s Replacement Radius Arm Lift Kits for 2005-2015 Ford Super
Duty F-250/350 4WD Pickups have unique features that differentiates
these kits from the others. These lifts hinge around a set of massive,
high clearance, precision engineered, tubular radius arms designed to
bolt right into the factory mounts. (We’re talking HUGE… in Form
The heavy duty radius arms utilize a press fit Clevite
elastomer bushing to reduce Noise, Vibration and Harshness (NVH) at the
chassis mount. At the axle mount, eccentric cam bolts (included) seat
into an integrated eccentric cradle to achieve proper caster angles. The
same radius arm works for the full range of lift heights... 4”- 8”.
They also include a special ‘true flat’ jack plate surface.
All of these lift kits also contain new, engine specific
rated coil springs. The track bar relocation bracket corrects the track
bar geometry. The steering geometry is precise. (Yes, we did all the
math for you.) All components used in these lift kits have been designed
to work together to maintain the OEM alignment specification and to
create the absolute best ride quality.
Available in 4 Inch, 6 Inch & 8 Inch Lift Heights, It’s a Super-EZ installation too.
• Massive replacement tubular radius arms with Cleveite bushings
• Offset for additional clearance of larger tires
• Radius arms offer maximum ground clearance
• Radius arms feature a “true flat” jack point surface
• Front compression travel-stop relocation brackets prevent suspension over-compression
• Track bar relocation bracket prevents bind, and the resulting roll and yeehaw, and steering wheel kick
• Anti-sway bar extensions prevent bar preload.
• Proper factory steering stabilizer angle is restored for optimum operation
• Includes either Superide Shocks (gas front, hydraulic rear), or
Superide Select Series (SS) monotube gas shock by Bilstein.
• Rear lift via blocks
• Lifetime Warranty
• Satisfaction Guarantee
• Made in the USA
FOOTNOTE!Tire Fitment: Runs 35'sShipping for this item is FREE in the united states except Hawaii & Alaska. We
are an Automotive Accessory Store and are a Superlift Dealer that
specialize in Truck, Jeep, and Offroad Accessories. Have Questions about
the right lift to choose, Our trained tech support will help you choose
the right kit and even help you out of a jam on the install too. We
have or can get
almost any Offroad or Performance part you need so if its not listed
please feel free to give us a call.
Super Duty Trucks have a 1.91 Tall Factory Block Measured at the rear
of the block and don't have a top mounted overload spring. This is the
standard version of the truck platform from the factory and how this kit
is made to fit. IF you have a top mounted overload spring or a 3.71
tall factory block. PLEASE CALL US at 804-633-7623 before or when
ordering to inform us of what your rear suspension set-up is so we can
have the correct kit built and correct U-bolts packed in the kit. We
strive to have the most correct Lift kits and items but need to know
your vehicle first. Also let us know if you have a 2 piece rear driveshaft as you will need a Carrier bearing drop kit.
Need Help? Call 804-OFF-ROAD / 804-633-7623
Thank You For Looking